| Specification | ASTM B280 ASME SB280 / ASTM B68 ASME SB68 |
| Material | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910, C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000, C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C65500, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, C72200, etc. |
| Seamless Pipe size | 4 to 219mm W. T.: 0.5 to 20mm |
| Welded Pipe size | 5.0 mm – 1219.2 mm |
| EFW Pipe size | 5.0 mm – 1219.2 mm |
| Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Form | Round, Square, Hollow, Rectangular, Hydraulic, Straight Pipes Etc. |
| Sizes | - Copper Round Pipe
Wall thickness: 0.2mm~120mm
Outside Diameter: 2mm~910mm - Copper Square Pipe
Wall thickness: 0.2mm~120mm
Size: 2mm*2mm~1016mm*1016mm - Copper Rectangular Pipe
Wall thickness: 0.2mm~910mm
Size: 2mm*4mm~1016mm*1219mm |
| Hardness | 1/16 hard, 1/8 hard, 3/8 hard, 1/4 hard, 1/2hard, full hard, soft etc |
| Pipe End | Plain End, Beveled End, Treaded. |
| Length | Single Random, Double Random & Cut Length. |
| Marking | All Copper Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| Application | - Are made of pure electrolysis copper.
- They are precise in size and smooth on surface. Besides,
- Are of good heat conductibility.
- Thus, they are widely used for heat exchangers, radiators, coolers, electro-heat-up pipe, Air conditioner and refrigerators.
- Can be used for oil transportation, brake pipes, water pipes and gas pipes for construction.
|
| Finish | mill, polished, bright, oiled, hair line, brush, mirror, sand blast, or as required. |
| Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2 |
| Test | - Hardness Test
- Flattening Test
- Pitting Resistance Test
- Chemical Analysis – Spectro Analysis
- Micro and MacroTest
- Flaring Test
- Intergranular Corrosion (IGC) Test
- Mechanical Testing Such as Tensile of Area
- Positive Material Identification – PMI Testing
|
| Specialized in | Large Diameter Pipe |
| We can also cut, thread, and groove Copper Pipes to meet your specifications. Pipe Dimension ANSI/ ASME B36.10, B36.19, B2.1 |
